manualshive.com logo in svg

Miele HR 1134-3 AG, Installation Instructions Manual

Share
Download
Miele HR 1134-3 AG Installation Instructions Manual Download Page 22

Notes on installation

*INSTALLATION*

Installation location

This Range is not intended for outdoor use.
Ranges with a plumbed water connection must not be installed in rooms where
there is a risk of freezing temperatures.

The floor of the space where the appliance is to be installed must be flat, level, and
made of a strong, rigid material.

The niche floor must be made of strong, rigid material.

Because the Range is heavy and has to be secured with the anti-tip device
supplied, the surface must be able to fully bear the load of the appliance. If
necessary, seek the advice of an architect or construction expert.

Do not carry or lift the range by the oven door handle or the control panel!

Ventilation

The air intake and outlet openings must not be covered or blocked in any way.

22

Summary of Contents for HR 1134-3 AG





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands