Pyrolytic cleaning
^
of the
oven interior
Instead of cleaning the oven by hand,
you can run the Pyrolytic cleaning
programme
^
.
During the Pyrolytic cleaning
programme the oven interior is heated
up to over 400 °C. Any residual soiling
is broken down and reduced to ash by
the high temperatures.
This oven has three levels of pyrolytic
cleaning, each with a different duration.
Select:
– Level 1 for light soiling
– Level 2 for heavier soiling
– Level 3 for very heavy soiling
For safety reasons, the oven door is
automatically locked at the beginning of
the Pyrolytic cleaning programme.
It cannot be opened until the
programme has finished.
The timer can be used to delay the start
time of the Pyrolytic cleaning
programme, for instance to make use of
cheaper electricity tariffs.
At the end of the Pyrolytic cleaning
programme any residues such as ash
from the pyrolytic process can be easily
wiped away.
Setting up for the Pyrolytic cleaning
programme
The high temperatures used during
pyrolytic cleaning will damage
accessories that are not designed
for cleaning in the Pyrolytic cleaning
programme.
Please remove these accessories
from the oven interior before starting
the Pyrolytic cleaning programme.
This also applies to non-pyrolytic
accessories purchased separately
to the oven.
The following accessories are suitable
for cleaning in the Pyrolytic cleaning
programme and can be left in the oven:
– Shelf runners
– FlexiClip telescopic runners HFC92
– Rack HBBR92:
^
Take all non-pyrolytic accessories out
of the oven.
^
Place the rack on the top shelf level.
If not removed, coarse soiling can
smoke and cause the Pyrolytic
cleaning programme to switch itself
off.
^
Coarse soiling should be removed
before running the Pyrolytic cleaning
programme.
Cleaning and care
119
Summary of Contents for H6890BP
Page 21: ...aOn Off sensor K bDisplay c I N sensors Oven controls 21 ...
Page 153: ...153 ...
Page 154: ...154 ...
