Moisture plus
69
Residual water evaporation
When cooking using the addition of
moisture, the water will be equally
distributed between the number of
bursts of steam and used up as long as
the programme is not interrupted.
However, if a programme using the
addition of moisture is interrupted
before all the bursts of steam have
been injected, the water for these
unused bursts of steam will remain in
the system.
The next time Moisture Plus
or an
Automatic programme with moisture is
used
Evaporate residual moisture?
will
appear in the display with the options
Skip
and
Yes
.
It is best to start the evaporation of
residual water straight away so that
only fresh water is used during a
cooking programme.
The residual water evaporation
process
The oven will heat up and the residual
water in the oven cavity will evaporate.
Depending on the amount of water this
can take up to 30 minutes.
Steam can cause scalding.
Do not open the door while the
residual water is being evaporated.
During the evaporation process
moisture will condense on the door and
the oven interior. This condensation
must be wiped off after the oven has
cooled down.
Summary of Contents for H6860BPXB
Page 152: ......
Page 153: ......
Page 154: ......
Page 156: ...M Nr 10 491 140 06 en GB H6860BPX ...