Miele H6860BPXB Page 46 Operating And Installation Instructions Download

Page: 46 / 156

Settings

Safety

System lock



The system lock prevents the oven
being switched on by mistake.

The system lock will remain activated
even after a power failure.

Select

to activate the system lock.

The alarm and minute minder can still
be used when the system lock is
active.

–

The system lock is now active. If you
want to use the oven touch the



symbol for at least 6 seconds.

–

Off

The system lock is not active. You
can use the oven as normal.

Sensor lock

The sensor lock prevents the oven
being switched off by accident or
settings being altered whilst food is
cooking. Once activated, the sensor
lock deactivates the sensors and fields
in the display a few seconds after a
programme has been started.

–

The sensor lock is activated. Touch
the



symbol for at least 6 seconds

to use the sensors again. The sensor
lock is then deactivated for a short
period.

–

Off

The sensor lock is not active. All
sensors react to touch as normal.

Summary of Contents for H6860BPXB





























































































































































Search results

Summary of Contents for H6860BPXB

Reviews:

Related manuals for H6860BPXB

Brands by name

Popular brands

Miele H6860BPXB, Operating And Installation Instructions

Search results

Summary of Contents for H6860BPXB

Reviews:

Related manuals for H6860BPXB

Brands by name

Popular brands