Problem solving guide
122
Problem
Cause and remedy
Maximum operating hours
reached
appears in the
display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
Confirm with
OK
.
The oven is now ready to use.
Fault F32
appears in
the display.
The door lock for pyrolytic cleaning has not locked.
Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
If the message appears again, contact the Miele
Customer Service Department.
Fault F33
appears in
the display.
The door lock for pyrolytic cleaning has not opened.
Switch the oven off and then back on again.
If the door lock still does not deactivate itself,
contact the Miele Customer Service Department.
Fault
and a fault code
not listed here appears
in the display.
A fault has occurred that you cannot resolve.
Call the Miele Customer Service Department.
Function currently not
available
appears in the
display after selecting
the Descale function.
The steam injection system is faulty.
Call the Miele Customer Service Department.
Fault with moisture control
the automatic programmes
will run without moisture
appears in the display
after selecting an
automatic programme.
The steam injection system is faulty.
Call the Miele Customer Service Department.
Automatic programmes can be run without using
moisture assistance.
Programmes using
moisture assistance are
not taking in water.
Demo mode is active. You can select menu options in
the display and the sensor controls, but the steam
injection system pump will not work.
Deactivate demo mode by selecting
Settings
|
Showroom programme
|
Demo mode
|
Off
.
The pump for the steam injection system is faulty.
Call the Miele Customer Service Department.
A noise can be heard
after a cooking
programme.
The cooling fan remains switched on after a cooking
programme (see “Settings – Cooling fan run-on”).