Miele H 4681 Operating And Installation Instructions Download

Page: 31 / 60

Pyrolytic

A message will appear in the display
after a certain length of time to remind
you to run a pyrolytic cleaning
programme. You can disable this
message if you do not wish to be
reminded. Confirm the option "No
reminder".

Heating-up phase

The heating-up phase of the Fan plus,
Conventional and Auto roast functions

– will include a rapid heat-up phase if

the "Rapid" option has been
selected.
The message "Rapid heat-up phase"
will appear in the display during the
heating-up phase.

– will not include a rapid heat-up

phase if the "normal" option has been
selected.
The "Heating-up phase" menu option
will then not appear after a function
has been selected.

Start

The cooking programme will start
automatically about 20 seconds after
the last entry was made. Alternatively
you can start it manually.

If "Manual" has been selected, "Start"
will appear at the beginning of each
programme and must be confirmed
before the programme will start.

Recommended temperatures

If you frequently change a
recommended temperature it may be a
good idea to change it permanently.

Select the function you want and
change the temperature within the
range allowed.

Display

The contrast and brightness can be
adjusted.

Buzzer tones

The volume, melody and duration can
all be altered.

You can also set different melodies for
the minute minder and for cooking
durations.

You can also activate or deactivate the
tone which sounds each time a sensor
is touched.

Safety

The oven is supplied with the
following settings deactivated as
standard.
To use them you first have to
activate them.

The system lock prevents the oven
being switched on unintentionally, by
children for example.

If activated the

)

symbol will show in

the display when the oven is switched
off.

Changing settings

Summary of Contents for H 4681





























































Search results

Summary of Contents for H 4681

Reviews:

Related manuals for H 4681

Brands by name

Popular brands

Miele H 4681, Operating And Installation Instructions

Search results

Summary of Contents for H 4681

Reviews:

Related manuals for H 4681

Brands by name

Popular brands