Miele H 4681 Operating And Installation Instructions Download

Page: 17 / 60

Pressing this sensor calls up
additional information about the
option selected. Select "OK" to close
the information screen.

When the

oven is switched off

the

display will either remain dark or show
the time of day, if this has been set to
appear.

When the

oven is switched on

, the

Main menu

and several sub-menus will

appear:

Four oven functions

These can be selected directly (e.g.
Fan plus).

All oven functions

When called up all oven functions
available, including Light, will be
displayed.

Automatic

This oven offers a range of automatic
programmes. See the separate booklet
supplied with your oven for more
details.

User programmes

You can save the programmes and
settings you use most frequently and
also give them special names to help
you select them easily.

Settings

You can use this menu to change oven
settings (see "Changing oven settings).

SuperVision

(optional accessory, depending on
country)

This option will only appear if your
appliance is fitted with
Communication module XKM 2000
SV and has been signed on to the
Miele

home SuperVision system.

You can use this to call up the
SuperVision display, see "Miele

home

SuperVision".

After selecting

an oven function

(e.g.

Fan plus) options which can be entered
for the cooking process will appear in
the display, e.g.:

Temperature

Duration

Start time

Heating-up phase

If you call up a

sub-menu

(e.g

"Settings") you will be taken to the next
level.

From there you can move on to the next
sub-menu by selecting an option. You
can now select further options, e.g. the
language you want the display to
appear in.
A tick

will appear beside the setting

currently selected.

You can return to the menu above by
selecting "OK".

Controls

Summary of Contents for H 4681





























































Search results

Summary of Contents for H 4681

Reviews:

Related manuals for H 4681

Brands by name

Popular brands

Miele H 4681, Operating And Installation Instructions

Search results

Summary of Contents for H 4681

Reviews:

Related manuals for H 4681

Brands by name

Popular brands