Operation
52
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes af-
ter the last time a button has been
pressed or after the end of the program
(see "Settings menu - Optimize
standby").
Press the
button to switch the
dishwasher back on.
The dishwasher will not switch off
while a program or the FlexiTimer is
running or if there is a fault.
At the end of the program
At the end of a program, the In-opera-
tion indicator light will be visible flashing
slowly with the door shut. The buzzer
might also be sounding.
The program has finished when
End
appears in the display and the door has
opened slightly (if applicable).
In the
QuickIntenseWash
program, the
door will not open until a few minutes
after the program has finished.
The drying fan may continue to run for
a few minutes at the end of the pro-
gram.
You can now empty the dishwasher.
The In-operation indicator light will go
out 10 minutes after the end of the pro-
gram if the door is closed.
If you have deactivated the auto-
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the program, make sure
that you open the door fully.
Otherwise steam from the dish-
washer could damage the edge of
the counter because the fan is no
longer running.
