Miele G 7969 Operating Instructions Manual Download Page 41 | Manualshive

Page: 41 / 128

background image

Settings

41

Remote Update

The RemoteUpdate menu option is
only displayed and can only be
selected if the requirements for using
Miele@home have been met (see
“Using for the first time -
Miele@home”).

The RemoteUpdate function is used for
updating the software in your
dishwasher. If an update is available for
your dishwasher, it will automatically
download it. Updates will not be
installed automatically. They must be
initiated manually.

If you do not install an update, you can
continue to use your dishwasher as
usual. However, Miele recommends
installing updates.

Activating/deactivating

The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate the installation manually.

Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.

Running a RemoteUpdate

Information about the content and
scope of a RemoteUpdate will be
provided in the Miele App.

A message will appear in your
dishwasher display if a software update
is available.

You can install the update immediately
or postpone this until later. When the
appliance is switched on again, you will
be reminded about the update.

Deactivate RemoteUpdate if you do not
want to install the update.

The update may take several minutes.

Please note the following information
about the RemoteUpdate function:

- You will only receive a message when

an update is available.

- Once an update has been installed, it

cannot be undone.

- Do not switch the dishwasher off

during the update. Otherwise, the
update will be aborted and will not be
installed.

- Some software updates can only be

carried out by a Miele service
technician.

«
...
39
40
41
42
43
...
»

Summary of Contents for G 7969

































































































































Reviews:

No comments

Related manuals for G 7969

Brand: Candy Pages: 30

Brand: Samsung Pages: 132

Brand: Blomberg Pages: 44

Brand: White-Westinghouse Pages: 10

Brand: Neue Pages: 28

Brand: Dawlance Pages: 4

Brand: Blomberg Pages: 40

Brand: ZANKER Pages: 24

Dishwasher DWD63.1SS

Brand: Smeg Pages: 15

Brand: V-ZUG Pages: 76

Brand: Asko Pages: 28

Brand: Maytag Pages: 36

Brand: Samsung Pages: 40

Brand: Samsung Pages: 40

Brand: Samsung Pages: 39

Brand: Samsung Pages: 60

WA22J8700G Series

Brand: Samsung Pages: 61

Brand: Samsung Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands