Miele G 7961 Operating Instructions Manual Download

Page: 87 / 120

Frequently Asked Questions

Spray arm fault

Problem

Possible cause and solution

During the program and
at the end of the pro-
gram, the display shows
the following message:

Check spray arms

The dishwasher does
not turn off at the end
of the program.
The dishware may not
be clean because no
detergent was dis-
pensed. The

AutoDos

function is automati-
cally deactivated during
the program sequence.

The lower spray arm is blocked or the nozzles of the
lower spray arm are clogged. The

AutoDos

function

is automatically deactivated during the program be-
cause the AutoDos detergent outlet cannot be com-
pletely flushed out.



Turn the dishwasher off and back on again.

Messages appear in the display.



Perform a rotation check of the lower spray arm
and rearrange the wash items if they are blocking
the spray arm.



Clean the lower spray arm (see “Cleaning the
spray arms” under “Cleaning and care”).



Select

to confirm each message.



Start the program again.

Summary of Contents for G 7961

























































































































Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands

Miele G 7961, Operating Instructions Manual

Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands