Settings
33
2nd interim rinse
You can choose this function to
increase the cleaning performance of
the programs with a second interim
rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programs until it is
switched off again.
Hygiene cycle
If you mainly use low-temperature
programs (< 50°C / 122°F), there is a
risk of bacteria and unpleasant odours
building up in the wash cabinet (see
“Hygiene cycle” under “Cleaning and
care”).
If this function is switched on, a
message will be displayed
recommending the use of a high-
temperature program after several low-
temperature programs have been run.
Software version
You can display the electronic software
version of your dishwasher electronics
for technical support purposes.
Showroom program
For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.
Factory default
You can reset all dishwasher settings to
the factory default settings.
Select
Reset
and confirm with
OK
.
