Initial commissioning
21
Basic settings
Switching on the dishwasher
Open the door.
Switch the dishwasher on with the
button.
The welcome screen will appear when
the dishwasher is turned on.
For further information about the
display functionality, see “Display
functions” under “Guide to the
appliance”.
Setting the language
The display will change automatically to
the screen for setting the language.
Select the language you want as well
as the country, if applicable, using
the
buttons and confirm with
OK
.
For further information on setting the
language, see “Language” under
“Settings”.
A check
will appear next to the
language that has been set.
Setting the water hardness
The display changes to the screen for
setting the water hardness.
- You should program the dishwasher
to the correct water hardness for your
area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g., between 10–16 gr/gal (10–
15 °dH), always program the
dishwasher to the higher value (16 gr/
gal (15 °dH) in this example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gr/gal (°dH)
The dishwasher is programmed at the
factory for a water hardness level 1 gr/
gal (1 °dH).
Set the water hardness level in your
area and confirm with
OK
.
See “Water hardness” under
“Settings” for more information.
