Before using for the first time
20
Basic settings
Switching on the dishwasher
Switch the dishwasher on with the
button.
The welcome screen will appear when
the dishwasher is switched on.
For further information about the
display functionality, see the “Display
functions” section in the “Guide to the
appliance” chapter.
Setting the language
The display will then change
automatically to the screen for setting
the language.
Select the language you want as well
as the country, if applicable, using
the
buttons and confirm with
OK
.
For further information on setting the
language, see the “Language” section
in the “Settings” chapter.
A tick
will appear next to the
language that has been set.
Setting the water hardness level
The display will change to the screen
for setting the water hardness.
- You should programme the
dishwasher to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale) always
programme the dishwasher to the
higher value (2.7 mmol/l or 15 °dH in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Therefore, please enter the water
hardness:
____________°dH or mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
Set the water hardness level in your
area and confirm using
OK
.
See the “Settings” chapter, “Water
hardness” section for more
information.
Summary of Contents for G 7100C
Page 90: ......
