Miele G 6980 Operating Instructions Manual Download

Page: 57 / 100

Settings menu

Adjusting default values
Opening the Settings menu



Turn the dishwasher on with the



sensor button if it is turned off.

The main menu will appear in the dis‐

play.

If the Memory function is activated, the

program menu for the program last se‐

lected will be displayed instead (see

"Settings - Memory"). If this is the case,

use the



sensor button to switch to

the main menu.

To learn about the display, read the

section with the same name.



Select the

Settings 

option.

The display will switch to the

Settings 

menu.



Select the option you want to

change.

Press the



sensor button to see more

information about the program cur‐

rently selected.

Sub-menu options which have already

been selected will have a check



be‐

side them.



To exit a sub-menu again, use the



sensor button.

The display will revert to the menu

above.

Summary of Contents for G 6980





































































































Search results

Summary of Contents for G 6980

Reviews:

Related manuals for G 6980

Brands by name

Popular brands

Miele G 6980, Operating Instructions Manual

Search results

Summary of Contents for G 6980

Reviews:

Related manuals for G 6980

Brands by name

Popular brands