manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 92 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 92

Settings menu

92

Settings menu for changing
standard settings

Open the Settings menu

Switch the dishwasher on with the 

sensor if it is switched off.

The main menu will appear in the dis-
play.
If the memory function is activated, the
programme menu for the programme
last selected will be displayed instead
(see "Settings, Memory"). If this is the
case use the 

 sensor to get to the

main menu.

See " Guide to the appliance, Display"
for more information about the display
and controls.

Select the 

Settings 

 option.

The display will change to show the 

Set-

tings 

 menu.

Select the option you want to
change.

Touch the 

 sensor to call up more in-

formation about the programme cur-
rently selected.

Sub-menu options which have already
been selected will have a tick 

 be-

side them.

To exit a sub-menu again use the 

sensor.

The display will revert to the menu
above.

Language 

The display can be set to appear in one
of several different languages.

You can change the language in the
display via the 

Language 

 sub-menu.

Select the language you want and
confirm this with 

OK

.

Some languages also have a country
option to select.

If so, select the country you want and
confirm your selection with 

OK

.

The flag after the word 

Language 

acts as a guide if a language which
you do not understand has already
been set.
If this the case, keep selecting the op-
tion which has a flag after it until you
reach the 

Language 

 sub-menu.

Summary of Contents for G 6920

















































































































Reviews:

No comments