manualshive.com logo in svg

Miele G 6920, Operating Instructions Manual, Page: 108 / 112

Share
Download
Miele G 6920 Operating Instructions Manual Download Page 108

Settings menu

108

Software version

You can call up the electronic software
version of your dishwasher for technical
support purposes.

Confirm the display with 

OK

.

Showroom programme

For demonstration purposes only.

The dishwasher is equipped with vari-
ous demo programmes for showroom
use.

–

Demo mode

Demonstration programme for show-
rooms.

–

Demo with sound

 

This programme activates the circula-
tion pump to demonstrate the sound
of the dishwasher.

–

Demo AutoOpen

 

The door will open automatically.

–

Cont. BrilliantLight

The interior lighting is on constantly.

Factory default

You can reset all dishwasher settings to
the factory default settings.

You will be given the choice of 

Appliance

settings

 or 

Main menu

.

WLAN module settings (where applic-
able) have to be reset separately (see
"Settings, Miele@home, module set-
tings").

Select the one you want to reset.

Confirm the message 

Reset settings?

or 

Reset main menu?

 with 

Yes

.

To close the Settings menu

To close the 

Settings 

 menu use the 

sensor. This will take you back to the
main menu.

Summary of Contents for G 6920

















































































































Reviews:

No comments