Miele G 6920 Operating Instructions Manual Download

Page: 104 / 112

Settings menu

104

System lock

The system lock prevents your dish-
washer being used without your know-
ledge.

If an attempt is made to switch the
dishwasher on when the system lock is
activated

System lock 

will appear in

the display.

The lock must be cancelled before the
dishwasher can be used.

The appliance will lock each time it is
switched on while the system lock is
activated.

The appliance is delivered with the sys-
tem lock deactivated.



Select the setting you want and con-
firm with

Cancelling the system lock

To unlock the dishwasher, proceed as
follows:



Switch the dishwasher on using the



sensor.

System lock 

will appear in the display.



Confirm with

keeping the sensor

pressed for six seconds.

The dishwasher is now unlocked and
ready for use.

Temperature

The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.

The factory default setting is °C.



Select the option you want and con-
firm with

Brightness

There are seven different display bright-
ness settings.



Select the brightness you want and
confirm this with

Summary of Contents for G 6920

















































































































Search results

Summary of Contents for G 6920

Reviews:

Related manuals for G 6920

Brands by name

Popular brands

Miele G 6920, Operating Instructions Manual

Search results

Summary of Contents for G 6920

Reviews:

Related manuals for G 6920

Brands by name

Popular brands