Miele G 6910 Operating Instructions Manual Download Page 61

Page: 61 / 96

Settings menu

Saving options

Additional program options can be add‐

ed to some programs, e.g.,

Short

(see

"Program options - Options").
You can use the

Save options

option to

save settings you have chosen for a

particular program so that they are au‐

tomatically selected when you run the

program in the future.
The dishwasher is delivered with this

function deactivated.



Select the setting you want and con‐

firm with

System lock

The system lock prevents your dish‐

washer being used without your knowl‐

edge.
If an attempt is made to switch the

dishwasher on when the system lock is

activated,

System lock 

will appear in

the display.
The lock must be deactivated before

the dishwasher can be used.
The appliance will lock each time it is

switched on while the system lock is

activated.
The appliance is delivered with the sys‐

tem lock deactivated.



Select the setting you want and con‐

firm with

Deactivating the system lock

To unlock the dishwasher, proceed as

follows:



Switch the dishwasher on using the



sensor button.

System lock 

will appear in the display.



Confirm the message with

, keep‐

ing the sensor button pressed for six

seconds.

After six seconds, the dishwasher is un‐

locked and ready for use.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands