manualshive.com logo in svg

Miele G 6727, Operating Instructions Manual, Page: 66 / 104

Share
Download
Miele G 6727 Operating Instructions Manual Download Page 66

Programme chart

66

Further programmes 

ExtraQuiet

Very quiet programme with a longer
duration. Suitable for mixed loads of
crockery, pots and pans with moderate,
slightly dried on food residues.

SolarSave

This programme does not heat the
water. To use it, the water intake
temperature must be at least 45°C (see
“Water connection - Connection to the
water supply”). This programme is
suitable for mixed loads of crockery and
glassware with moderate, slightly dried
on food residues.

Maintenance programme

The wash cabinet is largely self-
cleaning. However, if residues or soiling
build up in the cabinet, they can be
removed by running the “Maintenance
programme” without a load. This
programme is designed for cleaning the
wash cabinet using care products such
as Miele's dishwasher cleaner or
conditioner (see “Optional accessories -
Dishwasher care products). Please
follow usage instructions on the
packaging.

Summary of Contents for G 6727









































































































Reviews:

No comments