manualshive.com logo in svg

Miele G 6727, Operating Instructions Manual, Page: 53 / 104

Share
Download
Miele G 6727 Operating Instructions Manual Download Page 53

Operation

53

Starting the programme

Press the 

Start

 or 

OK

 button.

The programme will begin.

The 

Start

 indicator light will come on.

A programme should only be
cancelled in the first few minutes, if
at all. Otherwise important
programme stages could be omitted.

Time display

The estimated duration of the
programme selected appears in hours
and minutes in the display before the
programme begins. During the
programme, the time left until the end of
the programme is displayed.

Each programme stage is indicated by
a symbol:

Pre-wash / Soak

Main wash

Interim rinse

Final rinse

Drying

Finish

The programme duration displayed may
vary with the same programme. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process, the water softener,
the type of detergent, the amount of
crockery and how dirty it is.

When a programme is selected for the
first time, the display will show the
average programme duration for a cold
water intake.

The times shown in the Programme
chart refer to standard test loads and
temperatures.

Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.

Summary of Contents for G 6727









































































































Reviews:

No comments