Miele G 6660, Operating Instructions Manual

Page: 85 / 96

Maintenance
85
Cleaning the water inlet filter
A filter is incorporated in the screw
connection of the valve on the water
inlet hose. The filter must be cleaned
when dirty, otherwise insufficient water
flows into the wash cabinet.

The plastic housing of the water
connection contains an electrical
component.
The housing must not be dipped in
water.
Recommendation
If the mains water contains a large
amount of insoluble substances, we
recommend fitting a large-area filter in
the connection between the tap and the
water inlet hose threaded union. This
filter is available from Miele.
Cleaning the filter:

Disconnect the dishwasher from the
mains supply.
Switch off at the mains socket and
withdraw the plug.

Turn off the tap.
 Unscrew the inlet hose.

Carefully remove the washer.

Withdraw the filter using pointed
pliers and rinse clean under running
water.
 Replace the filter and washer, making
sure they are sitting correctly.

Reconnect the inlet hose to the tap,
making sure it goes on correctly and
is not cross-threaded.

Turn on the tap.
If water leaks out, the inlet hose may
not be connected securely or it may
have been screwed on at an angle.
 Unscrew and reconnect the inlet hose
correctly.