Programme options
57
Factory default
If you have altered any settings from the
factory default, you can re-set them
back to the factory default settings.
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and
whilst
holding it in
switch the dishwasher
on using the
button.
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the
button 19 times.
The
indicator will flash once slowly
and then rapidly nine times at intervals.
The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.
–
: All settings are set to factory de-
fault settings.
–
: At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the
Start
but-
ton.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 6620
