Miele G 6570 Operating Instructions Manual Download

Page: 20 / 96

Caring for the environment

EcoFeedback consumption

indicator

The

Consumption

function is used for

calling up information about the energy

and water consumption of your

dishwasher (see "Settings menu,

Consumption").
Three different types of information can

be displayed:

– an estimate of the consumption

before the programme begins

– the actual consumption at the end of

the programme

– the total consumption of the

dishwasher

1. Consumption estimate:

After a programme has been selected,

first the name of the programme and

after a few seconds the estimated

energy and water consumption will

appear in the display.
The estimated consumption levels will

be displayed as a bar chart. The more

bars (

  

) in the display, the more

energy or water will be used.
The values are influenced by the

programme selected and any

programme options selected.
The display will change automatically to

show the time remaining.
The consumption indicator is switched

on as standard. However, you can also

switch the indicator off (see "Settings

menu, Consumption").

2. Actual consumption

At the end of the programme you can

call up the actual amount of energy and

water used by the programme which

has just been run.



Open the door at the end of the

programme.



Press

when the

Consumption (OK)

message appears in the display.

Switching the dishwasher off at the

end of the programme will delete the

actual consumption values for the

programme which has just been run.

3. "Consumption" setting

The

Consumption

setting gives a total of

the energy and water which has been

used in all previous dishwasher

programmes (see "Settings menu,

Consumption").

Summary of Contents for G 6570

































































































Search results

Summary of Contents for G 6570

Reviews:

Related manuals for G 6570

Brands by name

Popular brands

Miele G 6570, Operating Instructions Manual

Search results

Summary of Contents for G 6570

Reviews:

Related manuals for G 6570

Brands by name

Popular brands