Programme options
57
Factory default
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in, and
whilst holding it in
switch
the dishwasher on using the
but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
button 19 times.
The
indicator will flash once slowly
and then rapidly 9 times at intervals.
The flashing sequence in the display in‐
dicates whether a setting has been
changed from its factory default.
–
: All settings are set to factory de‐
fault settings.
–
: At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the pro‐
gramme selector button
.
The setting is now stored in memory.
Switch the dishwasher off with the
button.