Operation
44
Starting the programme
Start the programme by closing the
door.
The programme will begin.
The in-operation indicator comes on to
show that a programme has been star‐
ted.
A programme should only be cancel‐
led in the first few minutes, if at all.
Otherwise important programme
stages could be omitted.
Time display
The duration of the programme selec‐
ted appears in hours and minutes in the
display before the programme begins.
During the programme the time left until
the end of the programme is displayed.
The programme duration displayed may
vary with the same programme. It is in‐
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of deter‐
gent, the amount of crockery and how
dirty it is.
When a programme is selected for the
first time, the display shows an average
duration for a cold water intake.
The durations shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit calculates the pro‐
gramme duration required according to
the temperature of the water taken into
the dishwasher and the amount of
crockery.