Miele G 5260 Operating Instructions Manual Download

Page: 43 / 92

Operation

Switching on the dishwasher



Open the stopcock, if it is closed.



Open the door.



Make sure the spray arms can rotate
freely.



Press the



button.

The indicator light for the programme
selected will come on.

Selecting a programme

Choose your programme according to
the type of crockery and the degree of
soiling.

The different programmes and their
uses are described under

“Programme

overview”



Use the programme selection but-
ton



to select the programme you

want.

The indicator light for the programme
selected will come on.
The programme duration will appear in
hours and minutes in the display.

You can now select programme options
(see “Programme options”).

If any programme options are selected,
the appropriate indicator lights will also
light up.

Summary of Contents for G 5260





























































































Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands

Miele G 5260, Operating Instructions Manual

Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands