Frequently Asked Questions
55
Water intake fault
Problem
Possible cause and solution
The dishwasher
stopped working shortly
after the program
started.
The warning buzzer is
sounding.
The
Intake/Drain
indica-
tor light is flashing on
and off.
The water supply is turned off.
Turn on the water supply all the way.
The dishwasher stops
during a program.
The warning buzzer is
sounding.
The Intake/Drain indica-
tor light flashes.
Fault code
or
ap-
pears in the time dis-
play.
Before fixing the fault:
Turn the dishwasher off with the
button.
There is a problem with the water intake.
Turn on the water supply fully and start the pro-
gram again.
Clean the water intake filter (see "Frequently asked
questions").
The flow pressure at the connection point is lower
than 7.25 psi.
Contact a plumber.
Summary of Contents for G 4993
Page 66: ...66 ...