Miele FN 28262 edt/cs Page 7 Operating And Installation Instructions Download | Manualshive

Page: 7 / 64

background image

Warning and Safety instructions

7



The electrical safety of this appliance can only be guaranteed

when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.



Reliable and safe operation of this appliance can only be assured

if it has been connected to the mains electricity supply.



If the connection cable is faulty, it must only be replaced by a

Miele approved service technician in order to avoid a hazard.



Do not connect the appliance to the mains electricity supply by a

multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).



If moisture gets into electrical components or into the mains

connection cable, it could cause a short circuit. Therefore, do not
operate this refrigeration appliance in areas which are exposed to
moisture (e.g in a garage or laundry).



This appliance must not be installed and operated in mobile

installations (e.g. on a ship).



Do not use a damaged appliance. It could be dangerous. Check

the appliance for visible signs of damage.



During installation, maintenance and repair work, the appliance

must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:

– the mains circuit breaker has been switched off, or

– the screw-out fuse is removed (in countries where this is

applicable), or

– it is switched off at the wall socket and the plug is withdrawn from

the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.

«
...
5
6
7
8
9
...
»

Summary of Contents for FN 28262 edt/cs

































































Reviews:

No comments

Related manuals for FN 28262 edt/cs

Brand: U-Line Pages: 2

Brand: CHINA STIRLING Pages: 30

Brand: montpellier Pages: 20

Brand: Bromic Heating Pages: 16

accucold ACF33L

Brand: Summit Pages: 20

Brand: Rangemaster Pages: 48

Brand: Polar Electro Pages: 8

Brand: Iceking Pages: 13

Brand: Randell Pages: 1

Brand: Tricity Bendix Pages: 12

OKO-Arctis SUPER 2773GS

Brand: AEG Pages: 40

SILENTstar HD Rev2.0

Brand: Watercool Pages: 4

Brand: Rieber Pages: 51

Brand: Danby Pages: 6

Brand: Danby Pages: 17

Brand: Danby Pages: 28

Brand: Russell Hobbs Pages: 16

Brand: Continental Electric Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands