manualshive.com logo in svg

Miele F 2671 Vi, Operating And Installation Instructions

Share
Download
Miele F 2671 Vi Operating And Installation Instructions Download Page 65

Accessories

65

Accessories supplied

Appliance plug

Water filter (IntensiveClear mesh
filter)

The IntensiveClear mesh filter, which is
already installed in the appliance, filters
the mains water for making ice cubes.

The IntensiveClear mesh filter does
not need to be replaced, just cleaned
(see “Cleaning and care - Cleaning the
water filter (IntensiveClear mesh
filter)”).

Optional accessories

A range of useful Miele accessories and
care products is available for your
appliance.

Miele all purpose microfibre cloth

Light soiling and fingerprints on
stainless steel fronts, control panels
and furniture can be easily removed
with this microfibre cloth.

Stainless steel front panel

Stainless steel front panels provide a
high-quality exterior design for your
refrigeration appliance.

Handles and plinth ventilation grilles are
also available in stainless steel look.

Side-by-side installation kit

To install two or more refrigeration
appliances next to one another, you will
need the side-by-side installation kit
(see “Installation - Side-by-side units”).

Accessories are available from Miele
directly (see back cover for contact
details).

Summary of Contents for F 2671 Vi

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands