Making ice cubes
94
For the automatic ice cube maker to
operate, it must be connected to a
mains water supply (see “Mains water
connection”).
Risk to health due to
contaminated water.
Consuming polluted water can lead
to illnesses.
The first 3 batches of ice cubes
made after the ice cube maker is
started up must not be consumed,
as the water will have been used for
the initial rinsing of the water supply
line.
This applies to the initial
commissioning as well as when
using the refrigeration appliance
again after it has been turned off for
a long time.
Switching on the ice maker
Make sure that the ice cube container
is correctly located underneath the
ice maker.
In Settings mode
, use the
and
sensor controls to select
Dispenser unit
and select
OK
to
confirm your selection.
Use the
and
sensor controls to
select
On
and select
OK
to confirm
your selection.
Once the freezer zone has cooled down
to its set temperature, the ice maker will
fill with water.
As soon as the water is frozen, the ice
cubes drop out of the ice maker into the
ice cube container.
Ice cube production is halted
automatically when the ice cube
container is full.
The ice maker can make up to approx.
1.3 kg of ice cubes in 24 hours.
The amount of ice cubes made by the
appliance depends on the temperature
in the freezer zone.
The lower the
temperature, the more ice cubes
are produced.
After you have set up the appliance for
the first time, it can take up to
10 hours for the first ice cubes to drop
out of the ice maker and collect in the
ice cube container.
Risk of damage due to blocking
of the ice maker.
The ice maker could become
blocked and, as a result, be
damaged.
Do not place any bottles or food into
the ice cube container to chill them
quickly.
Empty the ice cube container at
regular intervals, or if you have not
produced any ice for more than a
week. This will ensure that you
always have fresh ice and the ice
cubes will not form a clump.
Ice cube production does not stop
when the ice cube container has
been removed. Ice cubes can fall
into the freezer basket underneath.
Only remove the ice cube container
for the shortest possible time
or
switch off the ice maker before
removing it.
Summary of Contents for F 2411 Vi
