Cleaning and care
77
Water nozzle
During the cooling down phase, water
is sprayed into the cooking compart‐
ment from a water nozzle which is loca‐
ted behind a deflector plate at the back
of the runners on the right-hand side.
With prolonged use, this nozzle can be‐
come dirty and will require cleaning.
The nozzle must be descaled if the fault
message
appears in the display.
Wait until several beeps sound. Then
open the door and remove the food
which is being cooked.
Danger of burning!
Take care as a large amount of very
hot steam may escape when the
door is opened. The food will also be
very hot.
Leave the door open to cool down
the oven compartment.
Remove the shelf runners on the
right-hand side (see "Shelf runners").
Pull out the nozzle.
Descale the nozzle using the recom‐
mended descaling agent. Follow the
instructions that accompany the des‐
caling agent.
After descaling, rinse the nozzle un‐
der fresh running water.
Before refitting the nozzle, all parts of
the appliance which carry water must
be flushed through.
Close the door and switch the appli‐
ance on. Select Steam cooking
at 100 °C.
Set a duration of 1 minute and press
the Start/Stop button.
Wait until the cooling down phase
has been completed, then refit the
nozzle and the shelf runners, ensur‐
ing the step on the nozzle is on the
left-hand side and aligned vertically
with the back of the shelf runners.
The steam oven can now be used again
as normal.
If the fault message
reappears af‐
ter the nozzle has been descaled,
contact Miele.