Controls
24
Symbols
The following symbols may appear in the display:
Symbol
Explanation
Allocates an illuminated
to an option and indicates that the
option can be selected.
If more than four options are available a bar will appear on the
right-hand side of the display. Use the allocated sensors to scroll
through the list.
The end of a list is indicated by a dotted line. By scrolling down
further, you reach the beginning of the list again.
/
These only appear when input is possible or necessary (e.g.
entering the date / setting the grill level).
A tick shows that a setting is active. "
" will not appear in front of
it and the sensor belonging to it will not be illuminated.
This symbol indicates that there is additional information and
advice about using the oven. Select
OK
to access the
information.
/ /
Water level indicator
Programme finished
Minute minder
Some settings, e.g. display brightness and buzzer volume are
selected using a bar chart.