Technical data
Total connected load: see data plate
Plumbing
The steam oven needs to be connected
to the mains water supply and to the
drainage system by a fully qualified
person in accordance with national and
local safety regulations.
The machine is constructed to comply
with German water regulations (DVGW),
and may be connected to a suitable
supply without an extra non-return valve
if national regulations permit.
The plumbing installation must be
made in such a way that the stopcock
is easily accessible after the appliance
has been built in.
The installer is responsible for ensuring
that the appliance functions correctly
when installed.
The manufacturer cannot accept
liability for damage which is a direct or
indirect result of incorrect installation or
connection.
Important
Refer to the steam oven installation
booklet for more information.
Electrical connection
See Installation Instruction Booklet
before making electrical connection.
All electrical work should be carried
out by a suitably qualified and
competent person, in strict
accordance with current national
and local safety regulations
(BS 7671 in the UK).
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
Ensure power is not supplied to the
appliance until after any installation
or repair work has been carried out.
The appliance must only be
operated when built in. This is to
ensure that all electrical parts are
shielded. Live parts must not be
exposed.
The
voltage and connected load
are
given on the
data plate
. Ensure that
these match the household mains
supply.
Services
58
Summary of Contents for DG 4064
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved 2810 M Nr 06 786 680 09 ...