Miele DAS 8630, Operating And Installation Instructions

Page: 24 / 52

Operation (automatic mode)
24
When Con@ctivity is active, the
rangehood always operates in
automatic mode (see “Before using for
the first time – Setting up
Con@ctivity”).
If you wish to manually operate the
rangehood, see “Operation (manual
mode) – Cooking without Con@ctivity”.
Cooking with Con@ctivity
(automatic mode)
 Switch on a cooking zone at any
power level.
The rangehood lighting will come on.
 Pull out the deflector plate.
The fan will come on at power level 2 .
The rangehood selects the power level
automatically during cooking.
This is determined by the total output of
the cooktop, i.e. the number of cooking
zones in operation and the power levels
selected.
 If you select a higher power level on
the cooktop or are using several
cooking zones, the rangehood will
switch to a higher power level.

When you reduce the power level on
the cooktop or the number of cooking
zones being used, the rangehood
power level will also be reduced.
Examples for power levels 1 to B
Reaction time
The rangehood reacts with a slight
delay because altering the power level
on the cooktop does not immediately
result in a reduction or increase in
cooking vapours.
Because the cooktop transmits the
information to the rangehood at
intervals, this can also cause delays.
The reaction can vary from a few
seconds to a few minutes.