manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 362 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 362

Cleaning and care

78

Dismantling the door

The oven door is an open system with 3
glass panes which have a heat-
reflective coating on some of their
surfaces.

When the oven is operating, air is
directed through the door to keep the
outer pane cool.

If soiling has worked its way in between
the glass panes, the door can be
dismantled in order to clean in between
the panes.

Take particular care as scratches can
damage the glass. When cleaning
the glass panes, do not use abrasive
cleaning agents, hard sponges or
brushes and do not use sharp metal
tools or scrapers.
Please also read the general notes
on cleaning the oven front before
cleaning the glass panes.

Oven spray will damage the
aluminium trims inside the door.
These should only be cleaned using
hot water and washing-up liquid
applied with a clean sponge or a
clean, damp microfibre cloth.

Be especially vigilant after
dismantling the door that the glass
panes do not break.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments