manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 355 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 355

Further applications

71

Bottling

Containers for bottling

Danger of injury! 

Do not use the appliance to heat up
or bottle food in sealed tins.
Pressure will build up inside them
and they can explode causing
damage to the appliance, as well as
the risk of injury and scalding.

Only use special jars for bottling:

– bottling jars

– jars with twist-off lids

Bottling fruit and vegetables

We recommend using Fan Plus 

.

The instructions are for 6–8 jars with a
capacity of 1 litre each.

Place the universal tray on shelf
level 1 and place the closed jars on
the tray.

Select Fan Plus 

 and a

temperature of 150–160 °C.

Wait until bubbles evenly rise in the
jars.

Reduce the temperature in time to
prevent the contents from boiling
over.

Fruit/Cucumbers

Turn the function selector to Oven
lighting 

 as soon as you can see

the bubbles forming in the jars. Leave
the jars to stand for a further
25-30 minutes in the warm oven.

Vegetables

Reduce the temperature to 100 °C as
soon as you can see the bubbles
forming in the jars.

[min.]

Carrots

50–70

Asparagus, peas, beans

90–120

 Bottling duration

When the bottling duration has
elapsed turn the function selector to
Oven lighting 

. Leave the jars to

stand for a further 25-30 minutes in
the warm oven.

After bottling

Danger of burning!

Wear oven gloves when removing
the jars from the oven.

Take the jars out of the oven.

Cover the jars with a towel and leave
to set for approx. 24 hours.

Make sure all jars are closed properly
when storing them.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments