manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 324 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 324

Clock/Timer

40

Deleting a cooking duration

Press 

 or 

 repeatedly until 

starts to flash.

Confirm with 

OK

.

The hours will flash.

Press 

 or 

 repeatedly until two

lines appear:

  

Confirm with 

OK

.

Four lines appear:

  

Confirm with 

OK

.

The cooking duration and any finish
time are deleted.

The time of day appears if no minute
minder has been set.

The oven heating, lighting and cooling
fan will switch on.

If you want to end the cooking
programme:

Turn the function selector to 

0

 and

the temperature selector to 

.

Take the food out of the oven.

Deleting a finish time

Press 

 or 

 repeatedly until 

starts to flash.

Confirm with 

OK

.

The hours will flash.

Press 

 or 

 repeatedly until two

lines appear:

Confirm with 

OK

.

Four lines appear:

Confirm with 

OK

.

The 

 symbol appears and the set

cooking duration counts down in
minutes, with the last minute counting
down in seconds.

If you want to end the cooking
programme:

Turn the function selector to 

0

 and

the temperature selector to 

.

Take the food out of the oven.

If you turn the function selector to 

0

,

the settings for the cooking duration
and the finish time will be deleted.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments