manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 323 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 323

Clock/Timer

39

  

Use 

 or 

 to set the minutes.

Confirm with 

OK

.

The finish time 

 is now saved.

The oven heating, lighting and cooling
fan will switch off.

The selected finish time appears in the
display.

As soon as the start time (



 -

 



 = 



) is reached, the oven

heating, lighting and cooling fan will
switch on.

The set cooking duration 

 appears

and then counts down in minutes, with
the last minute counting down in
seconds.

Changing the cooking duration

Press 

 repeatedly until 

 starts

flashing.

The remaining cooking duration
appears in the display.

Confirm with 

OK

.

The hours will flash.

Use 

 or 

 to set the hours.

Confirm with 

OK

.

The minutes will flash.

Use 

 or 

 to set the minutes.

Confirm with 

OK

.

The changed cooking duration is now
saved.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments