,
Before installation, it is important
to read the information given on the
following pages as well as the
"Appliance dimensions" and the
"Warning and Safety instructions" at
the beginning of this booklet.
This is particularly crucial when
using the cooker hood at the same
time as a heating appliance that
relies on oxygen from the same
room to avoid the danger of toxic
fumes building up.
Installation instructions
See enclosed Installation sheet for
instructions on how to install this
appliance.
Assembly parts
4 screws 8 x 60 mm
with
4 washers
and
4 plugs S 10
to secure the cover plate
to the ceiling
,
The screws and plugs are for use
in concrete ceilings only.
For other types of construction,
alternative suitable fixings will be
required.
Make sure the ceiling is strong
enough to bear the weight of the
cooker hood.
2 screws M4 x 8 mm
for securing the tower.
4 spacers
to use in the event of an
uneven ceiling.
1 floating bracket
to give a choice of
position for the exhaust cut-out in the
ceiling.
1 hose clip
for securing the exhaust
ducting to the exhaust stub.
Special installation instructions
for recirculation mode
In order to use the cooker hood in
recirculation mode, it has to be fitted
with a special conversion kit which is
available from the Spare Parts
Department (see "Technical data"). It is
supplied with its own fitting instructions.
After the cooker hood has been
installed, the charcoal filter has to be
fitted, and the operating hours counter
has to be set. See "Cleaning and Care"
and "Filter operating hours counter".
Installation
30
Summary of Contents for DA 420 V EXT
Page 12: ...Guide to the appliance 12 ...
Page 39: ...39 ...
Page 40: ...Alteration rights reserved 3011 M Nr 09 200 980 00 ...
