Before first use
27
Pull the descaling cartridge holder
forward.
Insert the descaling cartridge and
push it upward as far as it will go.
Slide the descaling cartridge holder
back into place.
Put the maintenance container back
inside the coffee machine and close
the machine door.
The descaling cartridge will fill with
water the next time the machine is
switched off.
Always wait for the coffee machine
to switch itself off. Do not force the
machine to switch off.
Once the cleaning and descaling
cartridges have been inserted, a
message will appear regarding the
current start time set for automatic
cleaning and descaling.
If you want to change the start time,
tap
Timer
and select the required
time.
Confirm with
OK
.
You can also adjust the start time for
automatic cleaning and descaling at a
later point.
Selecting the Performance Mode
You can select the appropriate mode to
suit your personal preferences (see
“Settings – Performance Mode”).
-
Eco Mode
: This is an energy-saving
mode.
-
Barista Mode
: This mode has been
optimized for unadulterated coffee
enjoyment.
-
Latte Mode
: In this mode, milk-
based drinks can be prepared within
a much shorter space of time.
Select the mode you want.
The coffee machine is now successfully
set up for use. You can now fill the bean
system.
Setting up the bean system
After setting up the coffee machine, you
will be prompted to set up the bean
system. The coffee machine will assist
you when first filling and naming the
bean containers.
Tap
Yes
.
If you select
No
, the assistant for
setting up the bean system will not be
shown again.
Filling the bean containers
The coffee machine has 2 bean
container drawers on the top left and
right.
Open the machine door.
