Cleaning and care
53
Cleaning the drip tray and
waste container
Danger of burning and scalding
on hot components or by hot liquids.
Components can become very hot
during operation. Touching hot
components can cause burning. The
liquids and steam dispensed are very
hot and can cause scalding.
If the pipework has just been rinsed,
wait a while before removing the drip
tray as the water used for rinsing will
still run out of the coffee spouts.
Please be aware that water in the
drip tray can also be very hot.
Do not touch hot components.
Clean the drip tray and waste
container
every day
to avoid
unpleasant smells and mildew.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray
and
the
waste container. The lid of the drip tray
does not need to be removed for
emptying.
Useful tip:
If the drip tray is very dirty,
clean it with a brush prior to placing it in
the dishwasher.
Open the appliance door.
Remove the drip tray with the waste
container from the appliance.
Remove the waste container from the
drip tray and empty the waste
container.
Apart from coffee grounds, there may
also be some water in the waste
container.
Dismantling the drip tray
The orange latches are not
removable.
Remove the lid from the drip tray:
push the orange latches on either
side outwards and undo the lid. Take
the lid off.
Summary of Contents for CVA 744C
Page 52: ...Cleaning and care 52 sharp metal scrapers steel wool or stainless steel wire scourers ...
Page 84: ......
Page 85: ......
Page 86: ......