Miele CVA 4070 EN-CA Technical Information Download Page 121

Page: 121 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

Position

Display /

Activation

Description / Results

Open

The solenoid for hot water is
opened.

COMPONENT
TEST

HOT WATER
VALVE

The solenoid for hot water is
closed.

initialize

The micro switches are tested,
and the brew unit is returned to
its home position. To prevent
mechanical damage, as a final
step, always activate intializing.
move clockwise for given period
of time

move counter-
clockwise for given
period of time

The brew unit moves into the
respective direction.

home position(1)

drain position (1)

COMPONENT
TEST

BREW UNIT

compressing
position (1)

The brew unit moves into the
respective direction.

The grinder is running.

COMPONENT
TEST

GRINDER

Off

The grinder is switched off.

The pump coffee/hot water
runs.

COMPONENT
TEST

WATER
PUMP

Off

The pump coffee/hot water is
switched off.

The steam pump runs.

COMPONENT
TEST

STEAM
PUMP

Off

The steam pump is switched
off.

The coffee/hot water and the
steam pumps operate until both,
the coffee/hot water and steam
system.

COMPONENT
TEST

SYSTEM
DRAIN
PUMP

Off

The coffee/hot water and the
steam pumps are switched off.

Table 6-9:

CVA4070 Service Mode (Cont. from Table 6-8; Cont. on Table 6-10)

121

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands