Miele CVA 4070 EN-CA Technical Information Download Page 118

Page: 118 / 131

Technical Information

CVA4070 / CVA4075 Coffee Systems

6.1.20

Descale Lock – Reset

Initial requirements

Switch the appliance off.

Accessing

Note

Complete the access within 10 seconds.

1. Touch pad

Clear

and hold.

2. Touch pad

On/Off

once.

3. Release pad

Clear

4. Touch pad

Clear

5 times and at the 5th time, hold it until the

programming mode appears.

Acknowledgement indicator

The display shows the positions of the programming mode

Programming.

Options

Touch pad next to

Reset descale.

no:

Back, without releasing the descale lock.

yes:

The descale lock is lifted.

Save and quit

Touch pad

On/Off.

Warning!

After service work is completed, descale the appliance.

118

Summary of Contents for CVA 4070 EN-CA




































































































































Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands

Miele CVA 4070 EN-CA, Technical Information

Search results

Summary of Contents for CVA 4070 EN-CA

Reviews:

Related manuals for CVA 4070 EN-CA

Brands by name

Popular brands