Miele CM6x10 Operating Instructions Manual Download Page 60

Page: 60 / 84

Cleaning and care

Maintenance programmes

The coffee machine has the following
maintenance programmes:

– Rinse the machine

– Rinse the milk pipework

– Clean the milk pipework

– Degrease the brew unit

– Descale the machine

Carry out the relevant maintenance
programme when the prompt to do so
appears in the display. Please see the
following pages for more information.

Opening the "Maintenance" menu



Touch





Select



with the arrow

sensors

Maintenance

. Touch

You can now select a maintenance
programme.

Rinsing the machine

You can rinse the water and coffee
pipework of the coffee machine
manually.

After a coffee has been dispensed, the
machine is rinsed before it switches
off. This removes any residual coffee.



Touch





Select

Maintenance

and touch



Select

Rinse appliance

and touch

The pipework will now be rinsed
through.

You may also be prompted to insert the
end of the milk tube into the drip tray.

Summary of Contents for CM6x10





















































































Search results

Summary of Contents for CM6x10

Reviews:

Related manuals for CM6x10

Brands by name

Popular brands

Miele CM6x10, Operating Instructions Manual

Search results

Summary of Contents for CM6x10

Reviews:

Related manuals for CM6x10

Brands by name

Popular brands