Cleaning and care
54
- dirt erasers
- sharp metal scrapers
- steel wool or stainless steel wire
scourers
Drip tray and waste container
Clean the drip tray and waste
container
every day
to avoid
unpleasant smells and mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray
and
the
waste container.
Danger of burning!
If the rinsing process has just
finished, wait a while before
removing the drip tray from the
machine. The water used for rinsing
will continue to run out of the coffee
spouts for a while.
Remove and empty the drip tray and
the waste container while the coffee
machine is switched on. Otherwise the
message
Empty and refit the drip tray and
the waste container
will appear in the
display even though the drip tray and/
or the waste container are not filled to
the maximum level.
Slide the central spout up as far as it
will go.
Summary of Contents for CM 6160
Page 88: ...Appliance dimensions INSTALLATION 88 ...
Page 90: ......
Page 92: ...M Nr 11 619 020 00 en AU NZ CM 6160 CM 6360 CM 6560 ...