manualshive.com logo in svg

Miele CM 5310 Silence, Operating Instructions Manual

Share
Download
Miele CM 5310 Silence Operating Instructions Manual Download Page 41

Cleaning and care

41

Cleaning by hand or in the
dishwasher

The brew unit is 

not

 dishwasher-

safe.
Clean the brew unit by hand only
under warm running water. 

Do not

use washing-up liquid or any other
cleaning agent.

The following must be cleaned 

by hand

only

:

- Central spout stainless steel cover

- Brew unit

- Bean container lid

- Lower panel

Risk of damage as a result of

excessively high dishwasher
temperatures.
Components may be rendered
unusuable (e.g. deformed) if washed
in a dishwasher at a temperature of
more than 55 °C.
For dishwasher-safe parts, the
maximum temperature of the
dishwashing programme selected
must not exceed 55 °C.

Contact with natural dyes such as
those found in carrots, tomatoes and
ketchup may discolour the plastic
parts in the dishwasher. This
discolouration does not affect the
stability of the parts.

The following components are

dishwasher safe

:

- Drip tray and lid

- Drip tray cover

- Waste container

- Water container

- Central spout (without stainless steel

cover)

- Ground coffee chute cover

Summary of Contents for CM 5310 Silence













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands