Miele CM 5310 Series Operating Instructions Manual Download Page 36

Page: 36 / 76

Profiles



Select

Delete profile

and confirm

with



Select the profile you wish to delete.



Select

Yes

and confirm with

The profile will be deleted.

Setting when the profile should
change (Change profile)

You can choose between the following
options:

Manually

: The selected profile will

remain active until you select another
one.

After each use

: The machine will

revert to the Miele profile whenever a
drink is dispensed.

When switched on

: The Miele profile

will be displayed whenever the coffee
machine is switched on, regardless of
which profile was selected before the
machine was last switched off.



Select

Change profile

and confirm

with



Select the option you want and
confirm with

Summary of Contents for CM 5310 Series













































































Search results

Summary of Contents for CM 5310 Series

Reviews:

Related manuals for CM 5310 Series

Brands by name

Popular brands

Miele CM 5310 Series, Operating Instructions Manual

Search results

Summary of Contents for CM 5310 Series

Reviews:

Related manuals for CM 5310 Series

Brands by name

Popular brands