Miele ATT 86, Operating Instructions Manual, Page: 46 / 156

en - Commissioning
46
Adjusting the height
The height of the transfer trolley can be adjusted using the lift cylin-
der. The height must be set so that the docking mechanisms of the
transfer trolley and the cleaning machine engage. This is performed
by the Miele Customer Service Department or a specialist company
authorised by Miele.
The conveyor rollers on the transfer trolley and in the cleaning ma-
chine must be at the same height so that the load carriers can be
moved easily.
It is possible to set 3 different height positions using a control ele-
ment. The control element is on the handle of the transfer trolley.

Press the “S” function button until a signal sounds (this will take
around 5 to 7 seconds).

Press the selected number button (within 2 seconds) until another
signal sounds.
The position is saved. When the number button is pressed, the
height-adjustable transfer trolley moves into the required position.