Operation
21
User interface in the display
The user interface of the machine is controlled by menus. The menus
are displayed in a 3-line display on the control panel.
The name of the menu (top line) and up to two options are shown.
The currently selected option is highlighted, e.g.
Settings
Language
Date
Menu operation
Settings button
For accessing the system settings menus.
and
Arrow buttons
The arrow buttons are used to navigate up and down by row within a
menu. Press and hold the button to automatically scroll through the
list to the end of the menu. Press the button again to continue
navigating.
Parameter values can also be altered in defined increments using the
arrow buttons. Instructions for this can be found in the relevant
sections.
OK
OK button
The
OK
button is used for confirming (acknowledging) a selection or
for saving input. The display then moves to the next menu or, when
entering parameter values, to the next input position. Instructions for
this can be found in the relevant sections.
Cancel button
Before the
OK
button has been pressed, a process can be cancelled
at any time by pressing the
button. The menu is then ended early
and the display changes to the next menu level up. Any setting
changes made will not be saved.
