Operation
61
System messages
After the machine is switched on or a program sequence is com-
pleted, a series of system messages may be shown on the display.
These indicate e.g., low fill levels in the containers or required mainte-
nance.
Changing the fil-
ter
Several hours before reaching the maximum permitted operation
hours, you will be prompted to change the air filters.
Now
Later ( operating hrs.)
Now
Later ( operating hrs.)
Clean coarse filter?
Clean the fine filter?
Confirm the message with
OK
and change the filter according to
the instructions in the section “Maintenance”.
Cleaning the filter
combination
The filters in the wash cabinet must be checked daily and cleaned
regularly; see “Maintenance/Cleaning the filters in the wash cabinet”.
A counter in the controls can be activated to remind you of the re-
quired cleaning at regular intervals.
Now
Clean filter comb.?
Later ( Programmes)
Clean filter combination!
Follow the instructions in the “Maintenance” section for cleaning the
filters.
Low fill levels
When the fill level is low in one of the containers, e.g., for process
chemicals or the salt container, you are prompted to refill the con-
tainer.
Refill salt
Refill DOS
Acknowledge the messages with
OK
and refill the relevant contain-
ers. To do this, follow the instructions in the sections “Filling
process chemicals and dispensing” and “Water softener”.
